|  | 
		
			| Hardware | 
		
			| Hardware Type | Indoor AP | 
		
			| Number of Radios | 2 | 
		
			| Number of Antennas | 8 Internal | 
		
			| Antenna Type and Peak Gain | PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz | 
		
			| Frequency Bands (GHz)* | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 | 
		
			| Radio 1 Capabilities | 2.4 GHz b/g/n (4x4:4 stream) 20/40 MHz (256 QAM) | 
		
			| Radio 2 Capabilities | 5 GHz a/n/ac (4x4:4 stream) 20/40/80 MHz (256 QAM) | 
		
			| Maximum Data Rate | Radio 1: up to 800 Mbps Radio 2: up to 1,733 Mbps | 
		
			| Bluetooth Low Energy (BT/BLE) Radio | \ | 
		
			| Interfaces | 2x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port | 
		
			| Power over Ethernet (PoE) | Dual redundant PoE power ports with support for IEEE 802.3at (2x2 operation with 802.3af) | 
		
			| Simultaneous SSIDs | Up to 16 (14 if background scanning enabled) | 
		
			| EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST | 
		
			| User/Device Authentication | WPA™ and WPA2™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist | 
		
			| Maximum Tx Power | 2.4 GHz: 24 dBm / 251 mW (4 chains combined)* 5 GHz: 25 dBm / 316 mW (4 chains combined)* | 
		
			| Kensington Lock | Yes | 
		
			| IEEE Standards | 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az | 
		
			| SSID Types Supported | Local-Bridge, Tunnel, Mesh | 
		
			| Per Radio Client Capacity | Up to 512 | 
		
			| Cellular Co-existence | No | 
		
			| LED Off Mode | Yes | 
		
			| Advanced 802.11 Features | 
		
			| 802.11ac MU-MIMO Wave 2 | Yes | 
		
			| Transmit Beam Forming (TxBF) | Yes | 
		
			| Low-Density Parity Check (LDPC) Encoding | Yes | 
		
			| Maximum Likelihood Demodulation (MLD) | Yes | 
		
			| Maximum Ratio Combining (MRC) | Yes | 
		
			| A-MPDU and A-MSDU Packet Aggregation | Yes | 
		
			| MIMO Power Save | Yes | 
		
			| Short Guard Interval | Yes | 
		
			| Wireless Monitoring Capabilities | 
		
			| Rogue Scan Radio Modes | Background, Full-time | 
		
			| WIPS / WIDS Radio Modes | Background, Full-time | 
		
			| Packet Sniffer Mode | Yes | 
		
			| Spectrum Analyzer | Yes | 
		
			| Dimensions | 
		
			| Length x Width x Height | 8.5 x 8.5 x 2.2 inches (215 x 215 x 56 mm) | 
		
			| Mounting Options | Ceiling, T-Rail, and Wall | 
		
			| Included Accessories | Mount kits for Ceiling, T-Rail, and Wall | 
		
			| Environment | 
		
			| Power Supply | SP-FAP400-PA-XX, GPI-115, or GPI-130 | 
		
			| Power Consumption (Max.) | 23 W max power draw in 802.3at mode and 12.95 W max power draw when in 802.3af power mode (operates in 2x2 mode) | 
		
			| Humidity | 5–90% non-condensing | 
		
			| Operating / Storage Temperature | -4–122°F (-20–50°C) / -40–158°F (-40–70°C) | 
		
			| Directives   | Low Voltage Directive • RoHS | 
		
			| UL2043 Plenum Material | Yes | 
		
			| Mean Time Between Failures | >30 Years | 
		
			| IP Rating | \ | 
		
			| Surge Protection Built In | \ | 
		
			| Hit-less PoE Failover | Yes | 
		
			| Certifications | 
		
			| Wi-Fi Alliance Certified | Yes | 
		
			| DFS | FCC, IC, CE, Japan, Taiwan, Korea | 
		
			| Warranty | 
		
			| Limited Lifetime Warranty | Yes | 
		
			| *Frequency selection and power may be restricted to abide by regional regulatory compliance laws. |